Method of Waterproofing of Toilets

Advertisements

The antique method of waterproofing turned into make a layer cement plaster introduced with chemical. Modern techniques hire waterproofing membranes on this place too.

for watch detailed video about Method of Waterproofing of Toilets, see below. for getting daily updates follow our facebook page and click see first option in following button. if you interested this. give this post to your friends and relatives.for more videos, subscribe now EBEN-EZER Interiors

Advertisements

Generally there are two kinds of waterproofing membranes:

Sheet membrane
Liquid membrane
Here we are discussing method which entails utility of liquid membrane along side sealant utility to joints.

Required tools and materials for Waterproofing of Toilets
Brush, scrapper, paint brush, curler tray, caulking gun

Advertisements

Primer, tape & silicon, waterproofing membrane

Surface guidance
Surface to be freed from all dust, loose particles, no contaminants, must be scrapped to make it easy, partitions should be brushed to cast off the undulations.

Priming of Toilet Surfaces
Primer is applied with assist of roller brush up to required height of the wall and then at the ground.

Bond Breakers
When the primer is going dry we are able to use mixture of silicon and tape. Tape to be carried out on 4 walls at required height. This is to make certain that waterproofing is achieved up to this peak best.

Sometimes waterproofing is required to finish height of the toilet walls or every so often can be 1-foot height only as in step with the requirement. Silicon is then put in all the corners vertically and horizontally very cautiously to make certain no hole is left.

First Coat of Waterproofing for Toilets
Start making use of the membrane with a paint brush starting from the corners in which silicon is applied ensure we pay extra interest to make 100 % insurance as this is the most important vicinity.

Waterproofing of Toilets Floor Slab
Similarly, where other places joints are coming at bathe fixture, any faucets or other sanitary objects or sinks inside the ground (lay the coat 4 inch in the holes) make a great coverage. So all critical regions are completed.

Waterproofing of Toilets – First Coat
Then take a roller brush and truely practice the waterproofing on all of the partitions and floor. When applying roller ensure we’re rolling it at ninety-diploma attitude.

Waterproofing of Toilets Walls
Second Coat of Toilet Waterproofing
After the first coat dries, put the second coat similar as above, cautiously brush on the corners and joints and curler at the walls and floor, we can use a specific coloration to make sure no vicinity is left of waterproof coat.

Waterproofing of Toilets – Second Coat
Some instances at the side of the liquid membrane, sheets of membrane also are constant at all of the joints, partitions & floors. Sheets can be laid along with first coat of liquid WPM. Finally eliminate the overlaying tape from the partitions.

Advertisements

Related Posts

Advertisements